This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.
­

Frequently Asked Questions

Be sure to check out our General Tips page as well for more advice on how to reduce maintenance and improve the health of your Pool or Spa. Please don’t hesitate to Contact Us if you don’t find the answer to your question or need further advice.

  • The gate must close by itself from any position.
  • The gate must open outwards and away from the pool.
  • The latch must lock by itself when in the close position.
  • The latch must be positioned on the pool side at least 150 mm from the top of the fence so a child can not reach the latch.

The pool fence must be at least 1200 mm high on all sides above ground level and restrict access from neighbours and your house.
That any gap about the fence be less than 100 mm. This includes from windows or doors.

Your pool area must display a CPR sign that is clearly displayed near and visible from all areas of the pool.
Your sign must show the current procedures for CPR approved by the Australian Resuscitation Council.
PoolSafetySign

In Queensland there have been different laws for some jurisdictions these are now in the consolidation sage and due to become state wide laws in November 2015. For your local laws check with your council. There are a number of websites that spell out the current situation such as this one:
Queensland Pool Safety Regulations and Laws.

Be responsible. Remember, Pool Safety Regulations are to help prevent deaths.
If your question remains unanswered phone or call to see Poolside knowledgeable and helpful staff.

If there is a strong odour of chlorine it is likely that you have chloramines in your pool. Chloramines occur when the chlorine has combined with organic matter, the combined chlorine is unhealthy and no longer free to sanitise.
The chloramines give off a strong chlorine odour. It is important at this stage to oxidise your pool with Burnout 600gm (50,000l).

  • Make sure there are no holes in the cleaner diaphragm or blockages in hammer or diaphragm.
  • Ensure skimmer and pump baskets are clean and the cleaner hose is firmly attached to the vacuum plate in skimmer box.
  • Check hoses are firmly joined together and there are no splits or holes in the hose.

  • Ensure the pump and skimmer basket are clean.
  • Clean the pool filter by backwash and rinse or clean the cartridge.
  • Check for obstructions in the cleaner or hose.
  • Check there is no air in the system.

  • Firstly check the length of the hose. It should be the length between the skimmer box and the far end of the pool plus 1m.
  • Ensure the return jets are facing down towards the bottom of the pool so the return pressure doesn’t interfere with the cleaner hose.
  • If the hose is continually curling up, lay it out in a straight line on a hot day.

The most likely cause of sore eyes is incorrect pH levels.
The ideal pH is 7.4. Excessively high chlorine levels can also cause eye irritation.

  • Ensure the filtration system is clean.
  • Check water balance, high pH can cause cloudy water ad can reduce chlorine levels.
  • Check phosphate levels if higher than 0.4ppm treat with Starver.
  • If water chemistry is correct and filter system clean treat water with Polysheen clarifier and run filter until water is clear.

  • Clean your filter ie backwash/rinse or clean filter.
  • Adjust pH to 7.4 to 7.6.
  • Broom pool surfaces.
  • Add Burnout 600gm (per 50,000l) down skimmer with filter running.
  • Add 1litre x Polygard (per 50,000l) evenly around edges of pool and run filter until clear.
  • When pool water is clear clean filter.
Copyright 2016 Poolside Noosa | All Rights Reserved